Vollrath Tray Slides and Cutting Boards for Affordable Portable - Manual

Item No. 2350036-1 Rev 01/14
Installation Instructions
Tray Slide, Plate Rest, Cutting Board
(Removable, Non-Folding)
These instructions cover the installation of the of removable non-folding tray slides,
plate rests and cutting boards.
T
ray
S
upporT
H
ardware
I
nSTallaTIon
1. Remove the plugs (A) from the holes (B) in the unit. See Figure 1.
B
A
B
A
Figure 1. Plug Removal
2. Install the screw (A), lockwasher (C) and flat washer (D). See Figure 1. Repeat
on the other holes as necessary.
B
A
D
D
C
C
B
A
D
D
C
C
Figure 2. Hardware Installation
p
laTe
r
eST and
B
rackeT
I
nSTallaTIon
1. Turn the plate rest (C) so the weld nuts (B) are exposed. See Figure 3.
A A
B
D
B
C
A
A
B
B
D
Figure 3. Plate Rest and Bracket Installation
2. Secure the brackets (D) to the weld studs (B) using the nylock nuts (A) as
shown.
T
ray
S
lIde and
B
rackeT
I
nSTallaTIon
1. Turn the tray slide (C) so the weld nuts (B) are exposed. See Figure 4.
A
A
B
D
B
C
A A
B
B
D
Figure 4. Tray Slide and Bracket Installation
2. Secure the brackets (D) to the weld studs (B) using the nylock nuts (A) as
shown.