Vollrath KDC1418-2-06 Acrylic Knock Down Bakery Display Cases - Manual

Installation Instructions
Item No. 2350239-1 Rev 09/14
www.Vollrath.com
Bakery Case Assembly Instructions
Item# KDC1418-2-06
PLEASE READ INSTRUCTION AND IDENTIFY ALL PARTS BEFORE
ASSEMBLY.
CAUTION: To ensure correct assembly read the following instructions and
understand their meaning before beginning. Please read carefully. Handle all
parts carefully to prevent injury or damage. Although edges and corners have
been deburred, they should still be considered sharp.
NOTE: DO NOT OVERTIGHTEN SCREWS AND HARDWARE.
Tools Needed:
„ 1 Medium Size Flat Head or Phillips screwdriver.
„ 1 Clean cloth to cover work surface, this prevents the case from scratching
during assembly.
The bakery case contains the following parts:
H
G
D
F
A C B
E
I
Figure 1. Bakery Case Parts
ITEM PART
NUMBER
QTY: DESCRIPTION
A N/A 15 Phillips Head Machine Screws (order 57978)
B N/A 3 Self-Locking Nuts (order 57978)
C 8013571 3 Clear Handles
D 8013031 4 Post and Screws (Included with Front Door
Panels)
E BC187B 1 Left Side Panel
BC188B 1 Right Side Panel
F BC186B 1 Bent Top and Hinged Rear Panel (Door)
G BC185B 1 Large Flat Bottom Panel
with (4) Clear Rubber Feet
H BC179B 2 Front Door Panels
I 86128 2 Trays
57978 1 Hardware Kit (Includes items A, B, C, and D)
1. Remove the bakery case and hardware from packaging.
2. Remove protective masking from display prior to assembly.
3. Lay one side panel (E) with rails facing up, flat on table and attach bent top
and hinged rear panel (door) (F) using (3) machine screws (A). See Figure
2.
A
E
F
Figure 2. Install Bent Top and Hinged Rear Panel Door