Ac b, Junior – Vollrath JUNIOR Out-of-Chamber Vacuum Pack Machine User Manual
Page 18
18
VACUUM PACKING MACHINE
CONDITIONNEUSE SOUS VIDE
MAQUINA DE VACÍO
Operating and service manual / Mode d’emploi et d’entretien
Manual de uso y mantenimiento / Ed. 01 - 2011
REV. 00 - Cod.: 1500387
EN
JUNIOR
VACUUM CREATION
3.
VACUUM CREATION
The vacuum can be created both AUTOMATICALLY and MANUALLY by following the instructions given below.
3.1
AUTOMATIC MODE
3.1.1
VACUUM CREATION INSIDE OF CHANNELLED VACUUM BAGS
• Connect the appliance to a power socket.
• Switch the machine on by pressing the button (1) “ON/OFF” until all the lights on the buttons come on briefly.
• Check sealing intensity by making sure that the third indicator of “SEAL TIME” and light “AUTOMATIC” are on. Regulate sealing intensity by
checking the thickness of the bag to seal selecting the right setting by pushing “SEAL TIME”.
• Lift the machine lid (A - Fig. 1).
• Insert the opening of the “channelled” bag containing the dry and cold product to be packed inside the limits of the seal (B) and place the end of
the bag on the reference notches (C).
• Lower the lid (A - Fig. 2), press the “AUTOMATIC” button and lightly press the lid: the machine completes the vacuum cycle, seals the bag and
releases the lid at the end of the cycle.
•
1 2 3 4
1
1
•
1 2 3 4
•
A
C
B
3.2
MANUAL MODE
3.2.1
VACUUM CREATION INSIDE OF CHANNELLED VACUUM BAGS
• Connect the appliance to a power socket.
• Switch the machine on by pressing the button (1) “ON/OFF” until all the lights on the buttons come on briefly.
• Check sealing intensity by making sure that the third indicator of “SEAL TIME” is on. Regulate sealing intensity by checking the thickness of the bag
to seal selecting the right setting by pushing “SEAL TIME”.
• Lift the machine lid (A - Fig. 3).
• Insert the opening of the “channelled” bag containing the dry and cold product to be packed inside the limits of the seal (B) and place the end of
the bag on the reference notches (C).
• Press “MANUAL” button lower the lid (A - Fig. 4), and press down lightly on the lid: once the required vacuum level has been reached, press the
button “SEAL” to start sealing; when the sealing operation has been completed the machine will be ready for sealing another bag.
Fig. 1
Fig. 3
A
•
B
C