Revolabs FLX2 VoIP Advanced - Manual (Page 42)

42
Bluetooth
The ‘Bluetooth’ menu has been explained earlier in this manual on page 27.
Home
When selecting the ‘Home’ menu item, the Dialer will go back to displaying the home
screen. The same effect can be achieved by pressing the ‘Return’ key, or the red ‘End
Call’ button.
Call
When selecting ‘Call’ in the menu, the Dialer will open the Dialer menu, allowing
entering and dialing a number.
Setup
Setup is divided into a generic area of features that are not
password protected and Advanced Setup, which requires a
password.
Display
1. Browse to the Display menu: Menu Setup
Display.
2. The Display menu offers five options: Contrast,
Brightness, Backlight time, whether the backlight
is on or off while the Dialer is in the Charger Base,
and to switch Network Alerts “Registration Failed”
on or off.
3. Use the up and down buttons to highlight the
setting you want to change, and press either
‘Enter’ or ‘Select’ to open that setting or change
the setting.
4. Use the up and down buttons to increase or
decrease the respective values.