Revolabs FLX Accessory Cable Guide - Manual

Revolabs offers a variety of accessory cables as part of our product line. These cables allow
you to easily connect your FLX system to a variety of video codecs, computers, and other au-
dio solutions for a complete UC Solution.
The Revolabs FLX Conference Phone offers 3.5mm balanced inputs and outputs. This con-
nector is often confused with a 3.5mm stereo connector, as it appears the same, but is wired
very differently. The Revolabs FLX Base Station can accept a balanced or unbalanced
3.5mm plug but will not accept a stereo 3.5mm plug. The Use of a stereo 3.5mm plug into the
FLX Base Station will result in either poor audio or no audio at all depending on what device
is connected at the other end of the cable.
Revolabs Inc.
FLX Accessory Cable Guide
Below are the specifications for each cable as well as a cross-reference guide for different UC
solutions. Please use the cross-reference guide below to determine the appropriate cable for
your UC solution.
If you have any questions about which cable to use or would like to find out how you can pur-
chase the correct cable please call Revolabs at 1-800-326-1088.
Balanced
3.5mm
Stereo
3.5mm
Positive +
Negative -
Shield (GND)
Left +
Right +
Shield (GND)
Rev 1.1 2/12/10