Revolabs FLX2 VoIP Advanced - Manual (Page 22)

22
c. Press the mute/unmute button on a
Microphone that is already out of the
charger.
NOTE: If there is either no Speaker active or no Microphones
outside the Charger Base when the incoming call is answered
from the FLX Dialer, the call will default to ‘handset mode’ and
will remain in ‘handset mode’. The call can only be switched to
‘speaker mode’ if the speaker and at least one microphone is
switched on. If all microphones are in the charger base at least
one has to be switched on before by pressing the microphone
button.
Declining an Incoming VoIP Call
1. When the FLX2 System identifies an incoming call,
it will play the ring tone through the FLX Speaker.
2. The FLX Dialer will display the caller ID information
for the incoming call.
3. A call can be ignored in one of two fashions.
a. Press the Red ‘End Call’ button on the FLX
Dialer.
b. Press the ‘Decline’ key on the FLX Dialer.
Note: Once the user ignores the call, the telephone
switch decides how to handle the call. It might for
example be transferred into voicemail, based on settings
in the telephone switch.