MSI Classic Motherboard - Manual (Page 8)

2
Software Application Guide
Control Center
Software Application Guide
Control Center
Control Center Overview
After installing and activating Control Center, you will see Overclock and Green Power
tabs at the top. You can click the tab to switch the control panel.
Overclocking Tab
When you launch Control Center, you will see the Overclock tab at first, this tab consists
of four blocks which are Mainboard, CPU, Memory and Overclock. You can monitor the
system status, adjust DRAM Timing and voltage under this panel.
Mainboard
information
CPU
information
Memory
information
Overclock
Control
Panel
Advanced
buttons
Profile
buttons
Overclocking
Mode bar
Note
Advanced and DRAM Timing button only appear when you use a Intel mainboard.
Important
The pictures in this guide are for reference only and may vary from the product you pur-
chased. Please refer to the actual screens of your system for detailed information.