MSI Classic Motherboard - Manual (Page 58)

52
Software Application Guide
VIRTU
Software Application Guide
VIRTU
VIRTU Operation
After the installation process completed, VIRTU is activated. Once activated, the Lucid
logo shows on system tray (the right bottom corner of the screen). Mouse right click at
the icon, will display the following screen.
Clicking on the “Open control panel” option will open a new window with VIRTU
control panel.
Clicking on “Disable” option, allows the user to stop VIRTU function. When
VIRTU is disabled, the system will use the Intel ® Core™ i7 / Core™ i5 / Core™
i3 IGP for graphics activities.
Invisible or grey logo means VIRTU is not activated.
In case no logo is shown on the system tray, it is possible to activate the driver and the
control panel manually by using the following instructions:
Click Start → Programs → VIRTU.
Right-click on “VIRTU Control Panel”.
In case logo icon is grey, right-click while pointing at the logo to get the following
screen:
Clicking on the “Enable” option, will activate the VIRTU.
■
■
■
1.
2.