MSI Classic Motherboard - Manual (Page 65)

Software Application Guide
VIRTU Universal MVP
59
Software Application Guide
VIRTU Universal MVP
d-Mode
d-Mode is provided for demanding 3D gamers to achieve uncompromised 3D perform-
ance of discrete GPU installed in the system, along with Virtual VSync and Hyperform-
ance quality/ performance improvement features. In this mode, Virtu Universal MVP
allows user to utilize integrated GPU special features such as trascoding, while display
is connected to discrete GPU.
Important
In d-Mode SLI and CrossFire are available. Media features can be virtualized by
VIRTU Universal MVP to integrated GPU.
Virtual Vsync and HyperFormance features are not available when SLI or CrossFire
is enabled.
To use Lucid VIRTU Universal MVP solution in d-Mode, display must be connected to
discrete GPU installed in the system as shown below.
•
•
Display connected to
graphics card
Installing VIRTU
In BIOS → SETTINGS → Integerated Graphics Devices Configuration → IGD
Multi-Monitor, the IGD Multi-Monitor must be set to Enabled.
Intel/ NVIDIA/ AMD GPU drivers must be installed prior to Lucid VIRTU Univer-
sal MVP installation.
Install Lucid VIRTU Universal MVP from MSI Driver DVD setup screen → Driver
→ OTHERS. You can also find setup.exe and double-click it to install. The full
path on the DVD is \\OtherDriver\Lucid VIRTU Universal MVP.
GPU drivers and Lucid VIRTU should be installed before running any graphic
application.
It is recommended to restart the system after every driver installation.
■
■
■
■
■