Cirrus Logic CDB61884 - Manual (Page 11)

CDB61884
DS485DB1 11
4.3.1 Clear All Button Description
The CLR All Button shown Figure 14 is used to set
all the bits in the corresponding register to 0s. This
button is placed to the left of each register that has
write access.
4.3.2 Write All Button Description
The Write All button shown in Figure 15 writes
every bit of every register on the current register
screen. This button is located in the bottom right
corner of each register screen.
4.3.3 Read All Button Description
The Read All button shown in Figure 16 reads ev-
ery bit of every register on the current register
screen. This button is located in the bottom left cor-
ner of each register screen.
4.4 Write Button Description
The Write button shown in Figure Figure 17 writes
the bits of the corresponding register. This button is
located to the right of every register that allows
write access.
4.5 Read Button Description
The Read button shown in Figure 18 reads the bits
of the corresponding register. This button is located
to the right of every register.
4.6 Program Exit Function
To exit any of the register screens simple press the
X in the top right hand corner of each screen. This
Figure 14. Clear All Button
Figure 15. Write All Button
Figure 16. Read All Button
Figure 17. Write Button
Figure 18. Read Button