Cirrus Logic CS5550 - Manual (Page 7)

CDB5550
7
A pop-up window will also appear prompting the user to select the appropriate data source from the Setup
menu, located in the upper left hand corner of the Start-Up window. The user has two options: USB and
Data from Disk. See Figure 2.
Figure 2. CDB5550 Setup Options
If the USB setup is selected, the evaluation software will be ready to communicate with the CDB5550 via
the USB connection. If the Data from Disk setup is selected, the evaluation software will prompt the user
to select the appropriate data file. This option allows the user to view previously captured data without
having a CDB5550 connected to the PC. See Section 2.3 for more details.
After the user selects the appropriate setup, the Menu option becomes available in the Start-Up window.
The Menu pull-down has five options: Start-Up Window, Setup Window, Calibration Window, Conversion
Window, and Data Collection Window. See Figure 3.
Figure 3. CDB5550 Menu Options