Cirrus Logic CS5550 - Manual (Page 10)

CDB5550
10
will result in the data being updated ten times a second. Please note that the software only supports cycle
counts between 400 to 4000 when in the Conversion Window.
Figure 6. CDB5550 Conversion Window
2.2.4.1. Single Conversion Button
On pressing this button, a single conversion will be performed. After the conversion is complete, the Re-
sult data column will update with the values present in each data register.
2.2.4.2. Continuous Conversions Button
This button functions similarly to the Single Conversion button, except that continuous conversions are
performed instead. The data on the screen is updated in the same fashion, and the Stop button terminates
this action. The Mean and Standard Deviation columns will update every N cycles, where N is the number
in the Samples to Average box.
2.2.4.3. Standby/Sleep/Power Up Buttons
The Conversion Window also contains the power mode control for the CS5550. The user can select
among normal operation (Power Up), Standby Mode, or Sleep Mode. To exit Standby or Sleep mode, click
the Power Up button. Refer to the CS5550 datasheet for more information on the various power states.