WIKA CPH6200 User Manual
Page 8
Hand-Held Pressure Indicator
CPH6200-S1 / CPH6200-S2
GB
11221780.1.3 01/2009 GB/D/F/E
WIKA Operating Instructions Hand-Held Pressure Indicator
8
1
2
3
4
5
6
3
4
5
5
1
2
1.4 Display
1. Main display: shows the current measured value of CH1.
2. Lower display: For 2-channel version shows the measured value
of CH2 or DIF (CH1-CH2). For 1 channel version it displays the min,
max or hold function values.
3. Logg: shown if logger function is selected, flashes if cyclic logger is
running.
4. Tare: indicates that tare function is activated.
5. SL: indicates, that the sea level function is activated.
6. Measuring unit: an arrow points to the chosen measuring unit.
1.5 Basic operation
On turning the device on; if the logger function is selected, the
integrated clock‘s time will be displayed briefly. If a zero point adjust-
ment has been carried out, the display will indicate this by showing
"nuLL- Corr".
After changing the battery the menu for setting the clock is activated
automatically ('CLOC'). Check the clock and adjust if necessary (see
Section 2).