WIKA CPH6200 - Manual (Page 23)

Hand-Held Pressure Indicator
CPH6200-S1 / CPH6200-S2
GB
11221780.1.3 01/2009 GB/D/F/E
WIKA Operating Instructions Hand-Held Pressure Indicator 23
Input 1: for CPH6200-S1; 2: for CPH6200-S2
Pressure range in bar 0.1 0.16 0.25 0.4 0.6 1.0 1.6 2.5 4.0 6.0
Overpressure safety in bar 1 1.5 2 2 4 5 10 10 17 35
Burst pressure in bar 2 2 2.4 2.4 4.8 6 12 12 20.5 42
Resolution in mbar 0.1 1
Pressure range in bar 10 16 25 40 60 100 160 250 400 600 1000
Overpressure safety in bar 35 80 50 80 120 200 320 500 800 1200 1500
Burst pressure in bar 42 96 250 400 550 800 1000 1200 1700 2400 3000
Resolution in bar 0.01 0.1 1
Type of pressure gauge {absolute 0.25 up to 16 bar & vacuum on request}
Accuracy of the measu-
ring chain 0.2 % FS +/- 1 digit at reference temperature of 20 °C (optional 0.1 %)
Calibration* factory calibration certificate (optional: DKD calibration certificate)
Display large LCD display for display of 2 values and additional information
Range of display max. -19999 up to 99999, depending on sensors used
Units can be selected from the following: mbar, bar, Pa, kPa, MPa, mmHg, inHg, psi
(dependent on range)
CPH6200 Digital Instrument specific details:
Functions via key press Min-, Max-memory, Hold, Tare, Offset-correction, Logger (Start/Stop)
Functions via Menu Min-, Max-alarm (acoustic**/visual), Sea-level (barom. air pressure), Power-Off-
Function, measuring rate: 4/sec (“slow“); > 1000/sec (“fast“); > 1000/sec unfil-
tered (“peak-detect“) [via “peak-detect“ and min-/max-memory: pressure peaks
of 1.5 msec can be detected]
Data logger - discrete value-logger: up to 99 data points (incl. time-stamp) via key press
- cyclic-logger: automatic logging of up to 10000 values incl. time.
cycle-time: selectable between 1 ... 3600 seconds
Interface 1) (serial) RS-232 or USB interface via special interface cables
Power supply 9V-zinc-carbon battery, alternative**: 9V rechargeable battery or mains supply
Power consumption Cycle-time slow: < 1.6 mA, fast: < 7.0 mA, Low-Power-Logger-Fct.: < 0.3 mA
Working temperature 0 ... 50 °C
Air humidity 0 ... 95 % relative humidity without moisture condensation
Storage temperature -20 ... +70 °C
Housing Impact-resistant ABS, membrane keyboard, transparent panels (CPH62I0 with
cover)
Weight Approx. 160 g
EMV- / CE-conformity The CPH6200 device corresponds to the essential protection requirements estab-
lished in the regulations of the council for the approximation of legislation of the
member countries regarding electromagnetic compatibility (89/336/EWG).
1) For the intrinsically safe version, the use of the interface is not permitted within an explosive atmosphere.
*) Calibrated in vertical mounting position with lower pressure connection.
**) Not available for the intrinsically safe version CPH62I0.
{} Items in curved brackets are optional extras at an additional price.
7. Calibration services
DKD-certificates - other certificates:
If the instrument requires calibration, we recommend returning it, along with its associ-
ated sensors, to the manufacturer. Only the manufacturer is able to verify the instrument‘s
basic settings and configuration, and if necessary correct them.
8. Specifications