WIKA LSD-30 - Manual (Page 6)

6 WIKA operating instructions level switch model LSD-30
GB
11613033.01 01/2012 GB/D/F/E
2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the appropriate level switch
has been selected in terms of measuring range, design and specific measuring conditions.
Non-observance can result in serious injury and/or damage to the equipment.
WARNING!
Observe the working conditions in accordance with Chapter 3 "Specifications".
Further important safety instructions can be found in the individual chapters of these
operating instructions.
2.1 Intended use
The level switch is used to convert a level into an electrical signal indoors and outdoors.
The level switch has been designed and built solely for the intended use described here, and may only
be used accordingly.
The technical specifications contained in these operating instructions must be observed. Improper
handling or operation of the level switch outside of its technical specifications requires the instrument to
be taken out of service immediately and inspected by an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on operation contrary to the intended
use.
2. Safety