Commissioning, operation – WIKA LSD-30 User Manual
Page 18
18
WIKA operating instructions level switch model LSD-30
GB
11613033.01 01/2012 GB/D/F/E
6.2 Operating modes
System start
■
Display is fully activated for 2 seconds.
■
When the level switch is powered up within the range of the hysteresis, the output switch is set to "not
active" by default.
Display mode
Normal operation, display of the level
Programming mode
Setting the parameters
6.3 Keys and functions
The level switch has two operating modes, the display mode and the programming mode. The selected
operating mode determines the respective function of the key.
Jumping into the programming mode
Keep the "MENU" key pressed for approx. 5 seconds. If the password is set to ≠ 0000, a
password will be requested first-hand. If authentication is successful, then it enters the
programming mode, otherwise it reverts to display mode.
6. Commissioning, operation
Returning to the display mode
Simultaneous pressing of both keys.
- 890.09.2190 (44 pages)
- A-10 (96 pages)
- A2G-50 (52 pages)
- A2G-55 (36 pages)
- AC-1 (88 pages)
- C-2 (24 pages)
- D-10-7 (112 pages)
- D-20-9 (51 pages)
- D-20-9 (35 pages)
- DG-10 (112 pages)
- DP-10 (44 pages)
- DPT-10 (96 pages)
- DPT-10 (92 pages)
- GCS-1 (76 pages)
- HP-2 (84 pages)
- IL-10 (31 pages)
- IPT-10 (56 pages)
- IPT-10 (48 pages)
- IPT-10 (28 pages)
- IPT-10 (36 pages)
- IS-20-F (7 pages)
- IS-20-F (43 pages)
- IS-20-H (7 pages)
- UT-10 (42 pages)
- UT-10 (52 pages)
- IUT-10 (78 pages)
- LH-10 (60 pages)
- LH-20 (60 pages)
- LS-10 (60 pages)
- MG-1 (92 pages)
- MH-1 (11 pages)
- MH-2 (9 pages)
- MHC-1 (84 pages)
- N-10 (35 pages)
- O-10 (108 pages)
- OT-1 (60 pages)
- P-30 (92 pages)
- PSA-31 (124 pages)
- PSD-30 (128 pages)
- R-1 (92 pages)
- S-10 (35 pages)
- S-11 (102 pages)
- S-20 (52 pages)
- S-20 (96 pages)
- SL-1 (21 pages)