WIKA LSD-30 - Manual (Page 10)

10 WIKA operating instructions level switch model LSD-30
GB
11613033.01 01/2012 GB/D/F/E
3. Specifications
3.3 Output signal
Switching output 1 Switching output 2 Analogue signal
PNP - 4 ... 20 mA
PNP - DC 0 ... 10 V
PNP PNP -
PNP PNP 4 ... 20 mA
PNP PNP DC 0 ... 10 V
Alternatively also available with NPN rather than PNP switching output.
Offset adjustment (display)
max. +1,500 mm
Scaling (display and analogue signal)
Zero point: max. +25 % of span
Final value: max. -25 % of span
Analogue signal
Load
■ Current output: ≤ 500 Ω
■ Voltage output: > 10 kΩ
Switching output
Switching point 1 and 2 are individually adjustable
Function
■ Normally open and
normally closed: freely adjustable
■ Window and hysteresis: freely adjustable
Switching voltage: Power supply – 1 V
Switching current: max. 250 mA per
switching output
Response time: < 200 ms
Adjustment accuracy: 2.5 mm steps