Kramer Electronics TP-1xl - Manual (Page 11)

The 708 Video Audio Line Receiver
9
5.2 Your 708 Video Audio Line Receiver
Figure 5 and Table 3 define the 708:
Figure 5: 708 Video Audio Line Receiver
Table 3: 708 Video Audio Line Receiver Features
# Feature Function
1 VIDEO OUT BNC Connector Connect to the composite video acceptor
2 EQ Trimmer Turn to adjust the output signal level 1
3 VIDEO GAIN Trimmer Turn to adjust the output signal equalization 1
4 AUDIO OUT RCA Connector Connect to the audio acceptor
5 TERM Push Button When pressed, terminates the unit that is the last in
the line (not looped)
6 INV Push Button When pressed, Inverts the incoming video signal
7 LOOP RJ-11 Connector Connect to the LINE IN terminal block of an additional
receiver to increase the number of outputs
8 LINE IN RJ-11 Connector Connect to the line out connector of the transmitter
9 ON LED Lights when receiving power
10 12V DC +12V DC connector for powering the unit
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level