Kramer Electronics TP-126-od - Manual (Page 30)

The TP-125-od / TP-126-od Transmitter / Receiver Set
27
7.3 Connecting the TP-125-od and TP-126-od
You can use the TP-125-od XGA / Audio / Data Line Transmitter together with
the TP-126-od XGA / Audio / Data Line Receiver
1
to configure a twisted pair
transmitter and receiver system, to transmit the video, audio and RS-232 control
signals via CAT 5 cable.
Before connecting the transmitter and receiver system you can acquire the
EDID (via TP-125-od) from the display or set the system to the default EDID,
see section 9
To connect the TP-125-od and the TP-126-od to create a twisted pair transmitter
and receiver system, as the example in
Figure 13 illustrates, do the following:
1. On the TP-125-od, connect:
ƒ An UXGA source (for example, the graphics card on a laptop) to the
UXGA IN 15-pin HD (F) connector and an audio source to the Audio
IN 3.5mm mini jack, for example, using a Kramer C-GMA/GMA
cable (VGA 15-pin HD (M) +Audio jack to VGA 15-pin HD (M)
+Audio jack)
2
ƒ An RS-232 cable with a 9-pin D-sub connector at one end to the
laptop, and a 3-pin terminal block connector at the other end to the
TP-125-od RS-232 port
3
2. On the TP-126-od, connect:
ƒ The UXGA OUT 15-pin HD (F) connector to the AV display system
ƒ The S/PDIF Audio OUT RCA connector to a digital AV Receiver
(leave the ANALOG Audio OUT 3.5mm mini jack unconnected)
ƒ An RS-232 cable with a 3-pin terminal block connector at one end to
the TP-126-od RS-232 port
2
, and a 9-PIN D-SUB connector at the
other end to the RS-232 port on the AV display system
3. Connect the Line OUT RJ-45 connector on the TP-125-od to the LINE
IN RJ-45 connector on the TP-126-od, via CAT 5 cabling
4
(with a range
of more than 300ft (>100m)).
1 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com
2 Not supplied. The full list of Kramer cables is on our Web site at http://www.kramerelectronics.com . Alternatively, you can
connect an UXGA source to the UXGA IN 15-pin HD (F) connector, and a separate audio source to the AUDIO IN 3.5mm
mini jack
3 As defined in Figure 10 and Table 9
4 For details of how to wire a CAT 5 LINE IN / LINE OUT RJ-45 connector, see Section 8