3 connecting the wall plates to the sv-552, 1 connecting the sv-301xl wall plate to the sv-552, Connecting the wall plates to the sv-552 – Kramer Electronics SV-552ALC User Manual
Page 29: Connecting the sv-301xl wall plate to the sv-552, Figure 7: connecting the sv-301xl to the sv-552
Defining and Connecting the Wall Plates
25
7.3 Connecting the Wall Plates to the SV-552
The wall plates are connected to the corresponding inputs on the SV-552
using the supplied
1
STP or optional BC-DGKat524 or BC-DGKat-623
cables (SV-306/307, see
Section 8.3
). The SV-301xl and the SV-302 U.S.
versions have RJ-45 CAT 5 connectors on the rear, as defined in
The SV-301xl and the SV-302 European versions have terminal blocks on the
rear, as defined in
The diagrams below show both U.S. and European versions for illustration
purposes only.
7.3.1
Connecting the SV-301xl Wall Plate to the SV-552
To connect the SV-301xl as the example in
separate color illustration in
Section 5.1
):
Figure 7: Connecting the SV-301xl to the SV-552
1. Connect the computer graphics source (for example, a laptop) to the
Computer In 15-pin HD connector and to the unbalanced stereo Audio In
3.5mm mini jack on the front of the SV-301xl, for example, using a
1 There are two types of STP cable provided with SummitView™: CP-STP-50 (plenum-rated for the SummitView™ US) or
C-STP-50 (non-plenum for the SummitView™ Europe). Other STP cables can also be used. However, when using longer
STP cables, image quality may be impaired