Kramer Electronics SV-552ALC - Manual (Page 27)

Defining and Connecting the Wall Plates
23
EDID information can be stored in the wall plate by using the FC-200 XGA
EDID Copier Kramer Tool (see the FC-200 XGA EDID Copier User
Manual).
7.2.2 Defining the SV-302 (England and Europe)
The SV-302 is a single-gang wall plate and has a terminal block at the
rear.
Table 12 defines the front and rear views of the SV-302.
Table 12: Defining the SV-302 (England and Europe)
1
SV-302 Front View SV-302 Rear View
# Feature Function
1 ON LED Lights red when receiving power (when no signal is
detected); lights green when receiving a signal
2 L AUDIO IN RCA Connector Connect to the left analog audio source
3 R AUDIO IN RCA Connector Connect to the right analog audio source
4 VIDEO IN RCA Connector Connect to the composite video source
5 IR OUT 3.5mm Mini Connector Connect to a machine via an IR Emitter
6 Terminal Block Connect to SV-552 using STP cabling (see Section 8.1 )
1 When mounting in Belgium and Germany, use the standard WP Adapter