9 using the p3k wizard, 1 changing the device parameters, Using the p3k wizard – Kramer Electronics VS-88HDxl User Manual
Page 28: Changing the device parameters, Figure 10: p3k wizard screen, 9using the p3k wizard
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the P3K Wizard
24
9
Using the P3K Wizard
P3K is a Kramer software program for upgrading the machine firmware and
accessing and changing device parameters. The P3K program can be
downloaded from the Kramer Web site at
www.kramerelectronics.com
.
9.1
Changing the Device Parameters
To change the device parameters do the following:
1. Connect a PC to the VS-88HDxl using any one of the following
connections:
• Connect a serial cable from an RS-232 9-pin D-sub rear panel
port on the PC to the VS-88HDxl as explained in section
• Connect an RJ-45 Ethernet cable from the Ethernet port on
the PC to the Ethernet port on the VS-88HDxl.
2. Open the P3K Wizard by double-clicking the desktop icon P3K Wizard.
The P3K Wizard screen appears
:
Figure 10: P3K Wizard Screen
3. Click the Connect button to open the Connect window.
1 The screens appearing in this manual are examples of the process. The actual screens may differ in their content.