beautypg.com

1 connecting to the vs-88dtp via rs-232, Connecting to the vs-88dtp via rs-232, Figure 3: connecting the vs-88dtp – Kramer Electronics VS-88DTP User Manual

Page 15: 8x8 dvi - twisted pair matrix switcher, Figure 3, Section

background image

VS-88DTP - Connecting the VS-88DTP

11

Figure 3: Connecting the VS-88DTP

8x8 DVI - Twisted Pair Matrix Switcher

5.1

Connecting to the VS-88DTP via RS-232

You can connect to the

VS-88DTP via an RS-232 connection using, for example, a

PC. Note that a null-modem adapter/connection is not required.

To connect to the

VS-88DTP via RS-232:

•

Connect the RS-232 9-pin D-sub rear panel port on the

VS-88DTP unit via a

9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin 5
need to be connected) to the RS-232 9-pin D-sub port on your PC

See also other documents in the category Kramer Electronics Routers: