Kramer Electronics VS-44HDxl User Manual
Page 25
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VS-44HDxl
22
7.3.2
Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL button.
The RCL button illuminates.
2. Press the appropriate INPUT / OUTPUT button (the button #
corresponding to the setup #). That setup configuration will blink in the
7-segment Display.
The memory recalls the stored data from that reference.
After pressing the same memory location the second time, the settings
will take effect.
To cancel this action, press the RCL button once again
7.4 Locking the Front Panel
To prevent changing the settings accidentally or tampering with the unit via the
front panel buttons, lock
1
your
VS-44HDxl. Unlocking releases the protection
mechanism.
To lock the
VS-44HDxl:
Press the LOCK button for three seconds, until the LOCK button is
illuminated.
The front panel is locked. Pressing a button will have no effect
To unlock the
VS-44HDxl:
Press the illuminated LOCK button until the LOCK button is no longer
illuminated
The front panel unlocks
1 Nevertheless, even though the front panel is locked you can still operate via RS-232 or RS-485, as well as via the Kramer
IR Remote Control Transmitter