Kramer Electronics VS-121HC User Manual
Page 31
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Kramer Protocol 2000
28
NOTE 14 – The number of inputs and outputs refers to the specific machine which is being addressed, not to the system.
NOTE 16 – The reply to the “REQUEST WHETHER PANEL IS LOCKED” is as in NOTE 4 above, except that here the
OUTPUT is assigned with the value 0 if the panel is unlocked, or 1 if it is locked.
NOTE 26 – After this instruction is sent with OUTPUT defined OFF, the unit will not send reply to the protocol commands.
In order to return to working with REPLY, this instruction must be sent with OUTPUT defined ON. In cases where there is
hardware control of the REPLY, (e.g. a DIP-switch to disable replying), this instruction is only valid when the hardware
REPLY is set ON.