Kramer Electronics VS-121HC - Manual (Page 20)

Technical Specifications
17
8 Technical Specifications
Table 5 includes the technical specifications and Table 6 defines the
communication parameters:
Table 5: VS-121HC Technical Specifications
1
INPUTS: 4 composite video (1Vpp/75
Ω) on RCA connectors
4 s-Video 1 Vpp (Y), 0.3Vpp (C) / 75
Ω on 4-pin connectors
4 component video (1Vpp/75
Ω) on RCA connectors
OUTPUTS: 2 component video (1Vpp/75
Ω) on RCA connectors
MAX. OUTPUT LEVEL: VIDEO: 2.1Vpp; XGA: 0.77Vpp AUDIO: 27Vpp
BANDWIDTH (-3dB): VIDEO: VGA / UXGA: 400MHz;
s-Video (Y): 310MHz;
Composite/SDI video: 310MHz;
HDTV compatible
AUDIO: 40kHz
DIFF. GAIN: <0.07% all channels
DIFF. PHASE: <0.05 Deg. all channels
S/N RATIO: VIDEO: 75dB all channels AUDIO: 75dB /1Vpp all channels
CONTROLS: 12 selector buttons, lock button, RS-232, RS-485, Ethernet, IR
POWER SOURCE: 100-240V AC, 50/60Hz, (115V AC, U.S.A.) 7VA
DIMENSIONS: 19-inch (W), 7-inch (D) 1U (H) rack-mountable
WEIGHT: 2.6kg (8lbs.) approx
ACCESSORIES: Power cord, Null modem adapter, rack ears, RC-IR2 remote control transmitter,
Windows®-based Kramer control software
OPTIONS: External remote IR receiver cable
Table 6: Communication Parameters
EDID
EDID data is passed between Input 1 and Output 1
RS-232
Protocol 2000
Baud Rate: 9600
Data Bits: 8
Stop Bits: 1
Parity: None
Command Format: HEX
Example (Output 1 to Input 1): 0x01, 0x81, 0x81, 0x81
Ethernet
Default Settings Reset Settings
IP Address: 192.168.1.39 Power cycle the unit while holding in the Factory Reset
button, located on the rear panel of the unit.
TCP Port #: 5000
UDP Port #: 50000
1 Specifications are subject to change without notice