Kramer Electronics VS-121HC - Manual (Page 16)

Operating the VS-121HC Switcher/Transcoder
13
6. Select Use the following IP address, and fill in the details as shown in
Figure 7 .
7. Click OK.
Figure 7: Internet Protocol (TCP/IP) Properties Window
7.4.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through
Cable)
You can connect the Ethernet port of the VS-121HC to the Ethernet port on
a network hub or network router, via a straight-through cable with RJ-45
connectors.
7.4.3 Configuring the Ethernet Port
After connecting the Ethernet port, you must install and configure the port.
For detailed instructions on how to install and configure your Ethernet port,
see the “Ethernet Configuration (FC-11) guide.pdf” on our Web site:
http://www.kramerelectronics.com .