3 installing the device firmware, Installing the device firmware, Figure 10: splash screen – Kramer Electronics VS-121HC User Manual

Page 22

Upgrading the VS-121HC Firmware

4. Power the VS-121HC ON.

Note: This sequence is critical – first operate the FLASH PROG switch

and then power on the unit

9.1.3 Installing the Device Firmware

To install the firmware, perform the following steps:

1. Double-click the desktop icon Shortcut to FLIP.EXE.

The Splash screen appears

Figure 10: Splash Screen

2. After a few seconds, the Splash screen is replaced by the “Atmel – Flip”

window:

1 The screens appearing in this manual are examples of the process. The actual screens may differ in their content.