Kramer Electronics VS-121HC - Manual (Page 28)

Hex Table
25
2. Select the required COM Port
1
3. Press the File button to select the .s19 firmware file included in the
package.
.
4. Press the Send button to download the file. The Send button lights red.
5. Wait until the download is complete and the red Send button turns off.
6. Power OFF the VS-121HC.
7. Press the ETH PROG button on the front panel of the VS-121HC
outward to its original position (see Figure 1 ).
8. Power ON the VS-121HC.
10 Hex Table
Table 7 lists the Hex values (which the protocol in section 11 describes in
more detail) for the VS-121HC Switcher and Transcoder:
Table 7: VS-121HC Hex Table
Inputs Component Video
OUT Group #
Composite
Video
In 1 01 81 81 81
In 2 01 82 81 81
In 3 01 83 81 81
In 4 01 84 81 81
s-Video
In 1 01 85 81 81
In 2 01 86 81 81
In 3 01 87 81 81
In 4 01 88 81 81
Component
Video
In 1 01 89 81 81
In 2 01 8A 81 81
In 3 01 8B 81 81
In 4 01 8C 81 81
1 To which the Product is connected on your PC