Kramer Electronics VP-81SIDN - Manual (Page 25)

VP-81SIDN - Operating the VP-81SIDN Locally 21
7.2 Muting the Input when using Step-In Commanders
To mute and unmute the input when using a Step-In Commander:
1. Press the Input Select button on the Step-In Commander.
The input is selected and the buttons lights.
2. Press the Step In button on the Step-In Commander.
The input is muted and the button no longer lights.
3. Press the Step In button on the Step-In Commander a second time.
The input is unmuted and the button lights.
7.3 Resetting all Input Priorities to the Default
To reset all input priorities to the default priority (10):
1. Press the Lock button until the button lights.
The front panel buttons are locked.
2. Press the Volume Control + and
– buttons at the same time.
All the TP Input Select buttons flash. When they stop flashing, the input
priorities have been reset to their defaults.
7.4 Selecting an Output
To select an output

Press one of the two front panel Output Select buttons.
The selected button lights.
7.5 Setting the Audio Output Volume
To set the audio output volume:

Press either the Volume Control + (to increase the volume) or the Volume
Control – (to decrease the volume) button.