Kramer Electronics VP-27 - Manual (Page 2)

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 1
3 Overview 3
4 Your VP-27 Presentation Switcher 3
5 Installing the VP-27 in a Rack 7
6 Connecting the VP-27 Presentation Switcher 8
6.1 Connecting a PC 10
6.2 DIP-switch Settings 10
7 Operating the VP-27 Presentation Switcher 11
7.1 Locking the Front Panel 12
7.2 Resetting the VP-27 Presentation Switcher 12
8 Firmware Upgrade 12
8.1 Downloading from the Internet 12
8.2 Connecting the PC to the RS-232 Port 13
8.3 Upgrading Firmware 13
9 Technical Specifications 15
10 Communication Parameters 16
11 Hex Table (Protocol 2000) 17
11.1 The Switching Control Hex Table 17
11.2 Audio Gain Control Hex Tables 17
12 ASCII Table (Protocol 3000) 18
12.1 The Switching Control ASCII Table 18
12.2 The Audio Gain Control ASCII Tables 19
13 Kramer Protocol 19
13.1 Protocol Output Definitions 19
13.2 Switching Protocols 19
13.2.1 Switching Protocols via the Front Panel Buttons 20
13.2.2 Switching Protocols via Protocol Commands 20
13.3 Kramer Protocol 3000 20
13.3.1 Protocol 3000 Syntax 20
13.3.2 Command Parts Details 21
13.4 Kramer Protocol 2000 25