Kramer Electronics VP-1608 - Manual (Page 17)

VP-1608 - Connecting a Single VP-1608 13
5.5 Setting the DELAY DIP-Switches
To achieve clean transitions when switching between non-genlocked sources, set
the delay time—ranging from 0sec to 3.5sec in increments of 0.5sec—via the
DELAY DIP-switches, as shown in the following table. The VP-1608 unit is shipped
from the factory set with no delay (0sec).
Sec DIP 1 DIP 2 DIP 3 DIP 4
0 OFF OFF OFF OFF
0.5 OFF OFF OFF ON
1.0 OFF OFF ON OFF
1.5 OFF OFF ON ON
2.0 OFF ON OFF OFF
2.5 OFF ON OFF ON
3.0 OFF ON ON OFF
3.5 OFF ON ON ON