Kramer Electronics VP-300T - Manual (Page 12)

Your VP-300T 1:2 XGA DA/ CAT 5 Transmitter
9
Figure 3: VP-200XLTHD XGA Line Amp / CAT 5 Transmitter
Table 3: VP-200XLTHD XGA Line Amp / CAT 5 Transmitter Features
VS Switch Slide the switch downward to change the VS polarity to negative polarity 1 ;
slide the switch upward to retain the polarity (default)
HS Switch Slide the switch downward to change the HS polarity to negative polarity 1 ;
slide the switch upward to retain the polarity (default)
6 Your VP-300T 1:2 XGA DA/ CAT 5 Transmitter
This section describes the topside (see section 6.1), and the underside (see
section 6.2) of the VP-300T 1:2 XGA DA/ CAT 5 Transmitter.
6.1 Your VP-300T 1:2 XGA DA/ CAT 5 Transmitter (Topside)
The VP-300T is a high-performance distributor for computer graphics
signals, accepting one input, providing necessary buffering and isolation,
and distributing the signal to its identical 2 outputs, as well as transmitting it
over UTP CAT 5 cable to its appropriate receiver. In particular, the
VP-300T has a:
Video bandwidth exceeding 430MHz, ensuring transparency even
when operating at the highest resolutions
Transmission range of more than 300ft (more than 100m) over
UTP cabling
Switch for ID Bit control
Is 12V DC fed
1 Downgoing syncs