Kramer Electronics VP-300T - Manual (Page 11)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
VP-200XLTHD XGA Line Amp / CAT 5 Transmitter
8
Figure 2: VP-200XLTHD XGA Line Amp / CAT 5 Transmitter
Table 2: VP-200XLTHD XGA Line Amp / CAT 5 Transmitter Features
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 LINE OUT RJ-45 Connector Connects to 1 the LINE IN RJ-45 connector on the TP-120 XGA Line
Receiver 2 or the VP-5R CAT 5 Receiver / 1:5 VGA/UXGA Distributor
3 XGA OUT 15-pin HD Connector Connect to the XGA acceptor
4 INPUT 15-pin HD Connector Connect to the XGA source
5 LEVEL trimmer Adjust 3 the output signal level
6 EQ. trimmer Adjust 3 the video EQ. (equalization) compensation
7 ON LED Illuminates when receiving power
Figure 3 and Table 3 define the VP-200XLTHD:
1 Using a UTP CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 10 and Figure 13)
2 Refer to the separate user manual: PT-110, PT-120, TP-120, WP-110, which can be downloaded from the Internet at this
URL: http://www.kramerelectronics.com
3 Insert a screwdriver into the hole and carefully rotate it, to trim the level