Kramer Electronics VM-28H - Manual (Page 16)

VM-28H, VM-216H - Using the VM-28H/VM-216H 13
5.1.2 Connecting the VM-216H 2 Input 1:16 HDMI Distributor
To connect the VM-216H, as the example in Figure 3 shows, do the following:
1. Connect the HDMI OUTPUT connectors (as required, up to 16 outputs can
be connected, not all outputs need to be connected) to up to 16 HDMI
acceptors, using Kramer HDMI copper cables. In this example, connect the:
 OUTPUT 1 connector to acceptor 1 (for example, a plasma display)
 OUTPUT 2 connector to acceptor 2 (for example, an LCD TV)
 OUTPUT 15 connector to acceptor 15 (for example, an LCD TV)
 OUTPUT 16 connector to acceptor 16 (for example, a plasma display)
2. Connect the two HDMI sources, for example, a DVD player and a set top box,
to the INPUT 1 and INPUT 2 connectors, respectively, using the Kramer HDMI
copper cables.
3. If required, connect a PC and/or controller to the RS-232 port (see
Section
5.2
).
4. Connect the power cord to the mains electricity.