Serial/usb port commands, Help, Help –c
Page 27: Reset –f, Sdi –r <1,2

Text mode
Original mode

© MuxLab Inc.

6G-SDI Extender Over UTP

Page 27

Serial/USB Port Commands

1. HELP Command

help

Description: Display all the command list definition available

Response:

List all available commands

help

–c

Description:

Help for a specific command

Response:

List the specifics of the demanded command

2. RESET Command

reset

–f

Description:

Reset the unit and restore the default factory settings

Response:

“ok”

3. SDI Command

sdi

–r <1,2>

Description: Set the ratio between the number of Input BNC versus
the number of outputs BNC (see table 4 for details). This command is
stored in NV memory and will remain valid after power cycle.

Arguments:

<1,2> 1 = 1:1, 2 = 2:1 or 1:2

Response:

“ok”

Serial/usb port commands, Help, Help –c Page 27: Reset –f, Sdi –r <1,2

Page 27: Reset –f, Sdi –r <1,2

Serial/usb port commands, Help, Help –c
Page 27: Reset –f, Sdi –r <1,2