Muxlab 6G-SDI Extender Over UTP - Manual (Page 20)

© MuxLab Inc. 6G-SDI Extender Over UTP
Page 20
4.2.
USB Driver Setup
When interfacing a MuxLab device with the USB port
on Windows XP, Windows 7, or Windows 8 operating
systems, a driver setup file will be required. For Linux
and Mac OS X operating systems, no driver is
necessary.
To install the USB serial driver, download the SC-
000032-A USB to serial driver file from the MuxLab
website and save it to the local hard drive. NOTE: If the
downloaded file is compressed, it will have to be
uncompressed before using it.
Plug the USB cable between the device and the PC, and
power up the device. The Found New Hardware
wizard will open (Figure 13). Select Locate and install
driver software (recommended).
Figure 3: Found New Hardware Wizard