SawStop Mobile Base - Manual (Page 6)

4 SawStop Professional Cabinet Saw Mobile Base
Installing Your Mobile Base - Method 1
6. Align the front end of the caster support with the mounting hole in the lower right corner of the front of the
cabinet and secure that end of the caster support to the cabinet with an M8 x 20 button head shoulder socket
bolt (see Fig. 6). Note that this bolt is different than the bolt used to secure the rear of the caster support to the
cabinet. Fully tighten the bolt using a 5 mm hex key.
5. The end of the caster support next to the back of the saw is the end with the mounting shoulder. Insert the
mounting shoulder through the mounting hole in the rear of the cabinet and secure that end of the caster
support to the cabinet with one M8 x 20 button head socket bolt, one M8 x 13.6 lock washer, and one M8 x 18
washer (see Fig. 5). Fully tighten the bolt using a 5 mm hex key.
Fig. 5
Fig. 6
mounting
shoulder
5
3
4