SawStop Mobile Base - Manual (Page 14)

1 SawStop Professional Cabinet Saw Mobile Base
Installing Your Mobile Base - Method 2
Fig. 24b
6. Locate the caster support, the linkage bar, two M8 x 35 button head socket bolts, and two M8 x 13.6 lock
washers. Note that one end of the caster support has a mounting shoulder and the other end does not (see
Fig. 4a). Mount the linkage bar to the inside of the caster support arm nearest the end without the mounting
shoulder as shown in Fig. 4b. Use the button head sockets bolts, lock washers, and a 5 mm hex key to mount
the linkage bar to the caster support arm. Make sure the linkage bar is positioned as shown in Fig. 4b with the
caster support in the notch on the linkage bar.
Fig. 25
7. With the saw tipped, place the ends of the two caster
support arms through the two holes in the inside right
face of the saw, as shown in Fig. 5. Make sure that
the caster support is oriented so that the linkage bar is
next to the front of the cabinet.
Fig. 4a
linkage bar
with a mounting shoulder without a mounting shoulder
caster
support
caster
support
arm
end without
a mounting
shoulder
linkage bar
front
notch
1