SawStop Mobile Base - Manual (Page 3)

1 SawStop Professional Cabinet Saw Mobile Base
While unpacking your mobile base verify that all the components shown on this page are included.
pedal assembly
3” caster
(two)
3” wheel
(two)
caster support plate
caster extension tube
caster support
wheel support
hardware pack owner’s manual
SawStop
linkage bar
SawStop ®
OWNER’S MANUAL
Professional Saw Mobile Base
Model MB-PCS-000
1. Never place fingers, toes or oth er body
parts under th e mobile b ase.
2. Always use the saw and the mo bile
base on a level surface. 3. Lower the saw b efore use. Never u se
the saw wh en it is raised off the flo or.
4. Lower th e saw sl owly, do n ot let it
drop back to the floo r.
! WARNING
5 mm short-arm
hex key
Professional Cabinet Saw Mobile Base Hardware Pack
Extension Spring, (1) 8
Lock Washers, M8 x 13.6 (4) 2
Washers, M8 x 18 (2) 4
Washers, M6 x 16 (2) 14 Flange Lock Nuts, M6 (2) 15 Hex Bolts, M6 x 40 (2) 13 Lock Washers, M10.5 x 17 (4) 11 Caster Nuts, 3/8” thread (2) 16
Button Head Socket Bolts, M8 x 35 (2) 1
Lock Nuts, M6 (2) 7 Shoulder Socket Screw, M8 x 17.7 (1) 9 Button Head Socket Bolts, M10 x 40 (2) 10
Washers, M10.5 x 20 (4) 12
Button Head Socket Bolts, M8 x 20 (2) 3
Button Head Shoulder Socket Bolts, M8 x 20 (2) 5
Fixed Wheel Axles 6
Unpacking Your Mobile Base
To install your mobile base on a new Professional Cabinet Saw
that has not yet been assembled...Go To PaGe 2.
To install your mobile base on a Professional Cabinet Saw that
already has a fence system installed ...Go To PaGe 10.
Important:
This manual contains two different sets of instructions.
-OR-