SawStop Mobile Base - Manual (Page 17)

15 SawStop Professional Cabinet Saw Mobile Base
14. Take the wheel support and place it inside the cabinet and above the pedal assembly, as shown in Fig. 3a.
Make sure that the end of the wheel assembly with the mounting shoulder is at the rear of the cabinet. It might
be a little awkward to position the wheel support above the pedal assembly, but the pedal assembly is loose
and can move to allow you to position the wheel support above the pedal assembly. When the wheel support
is correctly positioned the pedal assembly will be between the two wheels (see Fig. 3b). The pedal assembly
must be inserted through the hole in the cabinet before the wheel support is placed inside the cabinet, otherwise
the wheel support will block the pedal assembly.
Fig. 3a
Installing Your Mobile Base - Method 2
Fig. 33
15. Insert the mounting shoulder on the rear end of the wheel assembly through the mounting hole on the rear of
the cabinet and secure that end to the cabinet with one M8 x 20 button head socket bolt, one M8 x 13.6 lock
washer, and one M8 x 18 washer (see Fig. 33). Fully tighten the bolt using a 5 mm hex key.
the wheel support
is above the pedal
assembly
place the wheel support
inside the cabinet above
the pedal assembly
Fig. 32b
3
4