SawStop T-Glide Fence System - Manual (Page 11)

2. Take four more M8 x 25 countersunk socket head bolts and insert them through the four open holes in the
front rail and table (see Fig. 2a). Place an M8 washer and an M8 lock washer on the threaded end of each of
the bolts and then thread an M8 hex nut on each bolt (see Fig. 2b). Hand tighten the nuts; do not fully tighten
them.
front rail
Fig. 2b
Contractor Saw
Fig. 1b
2
5
4
3
2
5
3
4
Fig. 2a
2
SawStop T-Glide Fence System - Professional Series II 9
Installing Your T-Glide Fence System