SawStop SawStop User Manual
Page 3
3
To Run Saw in Normal Mode:
If you are finished
using the saw, flip the
main power switch off
after the blade has come
to a complete stop.
5.
WARNING:
Always turn off the main power switch
and unplug the saw before changing the
blade or performing any maintenance.
!
4.
Push the Start/Stop Paddle
in to stop the blade.
WARNING:
Do not touch the blade while the blade
is coasting down. Your touch will
activate the brake.
!
Flip the main power switch
up to turn on power.
1.
ON
OFF
Wait until the green
light is on steady and
the red light is off.
.
Pull the Start/Stop Paddle
out to spin the blade.
3.
REMOVE
TO LOCK
Start/Stop
Paddle
Switch
Box
Lights
Main Power
Switch