beautypg.com

Adjusting the blade-to-brake spacing – SawStop SawStop User Manual

Page 11

background image

11

Adjusting the Blade-to-Brake Spacing

Always adjust the blade-to-brake spacing after

installing a blade or brake cartridge.

See Owner’s Manual

?

pp.28-29

1.

Turn the saw OFF and unplug the power cord.

.

Remove the table insert.

3.

Place the yellow spacing gauge between the blade

and the brake as shown (or use a nickel instead).

The gauge should just fit between the blade and the brake.

4.

To

DECREASE

the spacing, turn the yellow bolt

CLOCKWISE

.

To

INCREASE

the spacing, turn the bolt

COUNTER-CLOCKWISE

.

(Use the 8 mm hex key included with saw.)

5.

With the saw off, spin the blade by hand two full

revolutions to make sure no tooth touches the brake.