Not sure, What are you cutting – SawStop SawStop User Manual
Page 2
What are you cutting?
If you don’t know whether the material you are about to cut is
conductive, perform the material conductivity test on page 5.
Not Sure?
Run the saw in
Normal Mode
to cut non-conductive materials
like wood, plastic, cardboard,
foam, Corian, melamine and
dry pressure-treated wood.
Run the saw in
Bypass Mode
to
cut conductive materials like
metal, very wet or very green wood,
Carbon-filled materials, mirrored
acrylic, carbon fiber materials and
wet pressure-treated wood.
For
Normal Mode go to page 3.
For
Bypass Mode
go to page
4.