SawStop SawStop User Manual

Page 13

If the brake has activated, remove the brake and blade together by “walking” the

blade and brake off the arbor and mounting pins. To “walk” them off, alternately pry the

blade and then the brake out a short distance at a time using a blade wrench.

See Owner’s Manual

pp.55-56

TO INSTALL THE CARTRIDGE:

Slide the cartridge onto the mounting

Insert the cartridge key with the red

pins until it is fully seated.

handle

pointing up.

Rotate the key

fully 90° counter-clockwise.

Lower the clamping handle fully downward.

Check the blade-to-brake spacing -- see page 11.

Key

Cartridge

Mounting

Key