Mittler Bros Machine & Tool 50200-OLD - Manual (Page 2)

Contrast
On/Off Zero
LR
RF
RR
RaceScale
P/N 50200
LF
50200
RaceScales Jr
Scale Instructions
On/Off T HIS BUTTON TURNS SCALE ON OR OFF WHETHER RUNNING ON
THE BATTERY OR POWER ADAPTER .
Z ERO U SED TO Z ERO SELECTED SCALE SYSTEM .
T O Z ERO ALL 4 WHEELS WITH 1 PUSH , SELECT ALL 4 WHEELS
( MAKE THEM BLINK )
C ONTRAST T HESE BUTTONS WILL LIGHTEN OR DARKEN DISPLAY FOR
EASIEST VIEWING , THE UP ARROW WILL LIGHTEN THE DISPLAY
AND THE DOWN ARROW WILL DARKEN THE DISPLAY
LF T HIS READING IS CREATED BY THE LEFT FRONT CABLE
RF T HIS READING IS CREATED BY THE RIGHT FRONT CABLE
LR T HIS READING IS CREATED BY THE LEFT REAR CABLE
RR T HIS READING IS CREATED BYT EH RIGHT REAR CABLE
Operating Instructions
Zeroing is accomplished by selecting desired wheel locations.
Selected locations are indicated by flashing numbers. It is usually
necessary to select all 4 wheel locations during initial turn on.
WHEN THE WEIGHTS ARE BLINKING THIS MEANS
THAT WHEEL IS SELECTED
You are now ready to scale your vehicle.
Place vehicle on scales.
If all 4 wheel locations are flashing the total weight will
show & the % location will read 100%.
To check L.S. (left side) you will select or de-select the
proper buttons so the 2 left side wheel locations are flash-
ing. You will now see the combined weight of the L.S.
wheels and thier % of the total.
Select and De-Select for any Information you want to see.
NOTE: Charge battery overnight at least once a
month for optimum life of battery.
M AKE SURE YOUR CABLES ARE PLUGGED INTO THE
CORRECT PADS FOR PROPER WEIGHTS
BATTERY: T HE R ACE S CALE J R . IS DESIGNED TO BE USED OFF OF THE BATTERY . T HE 110
C HARGER IS TO CHARGE THE SYSTEM BACK UP AFTER USE . B Y USING THE SYSTEM PLUGGED INTO 110
POWER DURING USE MAY CAUSE DAMAGE TO THE BATTERY . T HE AMOUNT OF USE YOU SHOULD
RECEIVED FROM YOUR SCALE ON A FULL CHARGE IS 4 - 6 HOURS . W HEN CHARGING THE UNIT YOU
SHOULD ALLOW 24 HOURS TO CHARGE TO FULL BATTERY CAPACITY