Mittler Bros Machine & Tool 50500 - Manual

RaceScale
Instructions
Deluxe
RaceScale RaceScale
FOR FURTHER TECHNICAL ASSISTANCE PLEASE CONTACT:
TANNER RACING PRODUCTS 121 E. MULBERRY FORISTELL, MO. 63348
800-558-4112 FAX 636-463-2874
www.tannerracing.com
www.mittlerbros.com
1. Replace shocks with solid struts.
2. Fill vehicle with all fl uids.
3. To activate the CG mode press the up or down arrow and
select Center Of Gravity.
4. To adjust wheel base go into the CG menu and change the
value to the nearest inch using the up or down arrows.
5. Place car on scales.
6. Select "store weight", this will store total car and front
weights. If the CG displays OVER, then the CG calculation
has gone over 100 inches. You will then need to try
again.
7. Raise the rear of the vehicle 10 inches.
8. CG number will appear on the screen.
7. To turn off the CG mode go back to the CG menu and turn