Mittler Bros Machine & Tool 2900-300 English Wheel Stand - Manual (Page 2)

3. Attach the front frame to the top and bottom tray using the same procedure as before. Once all bolts, washers & nuts
are started tighten them down.
4.
Install the casters using the 1” long bolts, lock washer and nut. The swivel caster go on the “H” frame, this is the back
of the stand. This will give you the most stability when using your machine. Attach the rigid caster to the front front
frame using the 1” long bolts, lock washers and nuts. Be sure to install the bolts from the caster side on the swivel
casters.
5. Turn stand over and set on the casters. Double check that all nuts are tight. Carefully set the English Wheel Machine
on the stand and line up the holes in the mounting feet with the holes in the upper tray. Use 4 of the 1” long bolts with
flat washers on them and slip into the holes. Put a flat washer, lock washer and nut on the bottom of the bolts. Once
all the bolts are installed tighten them.
Thank You for Your Purchase.
We appreciate your business.
If have any questions, comments or suggestions please contact us.
Front Frame
Rigid Caster
Use 3” long
bolts. Put a flat
washer under
the bolt head
and one on the
threaded end
before the lock
washer & nut
Swivel Caster.
Install Bolts
from the Caster
Side. Rigid Caster
Rigid Caster Mounting Hole
Swivel Caster.
Install Bolts
from the Caster
Side.