Mittler Bros Machine & Tool 950 - Manual (Page 2)

SAFETY
The purpose of the safety section of this manual is to inform
operators and maintenance personnel of the precautions to be taken while
operating or servicing the machine. The following are a few basic
guidelines to follow, but as with any type of machinery good judgment and
a safe attitude should be applied at all times.
1. Always wear safety clothing, including eye protection and protective
footwear, while operating or servicing the machine.
2. Keep all body parts and any foreign objects away from the nose bar and
clamping area of the brake while in operation.
3. Never use a pipe or bar on the clamp handles for additional leverage.
4. Do not operate the machine if it has been damaged or is not operating
properly.
5. Do not wear jewelry (watches, rings, necklaces, etc.), or loose fitting clothing
while operating or servicing the machine.
6. The machine should only be operated or serviced by properly trained,
authorized personnel.
7. Replacement parts should have the same specification and operation as the
original parts on the machine.
8. All guards and covers must be in place before operating the machine.
9. Before starting the machine, be sure it is set up properly.
10. Do not operate or service any machine while under the influence of drugs or
alcohol.
NOTE: THESE SAFETY RULES ARE FOR YOUR BENEFIT TO HELP PREVENT
INJURY TO YOURSELF AND/OR YOUR CO-WORKERS. REVIEW ALL SETUP AND
OPERATING PROCEDURES, WHETHER COVERED OR NOT, IN THIS MANUAL TO
HELP INSURE SAFE OPERATION OF THE MACHINE.